DJ‑D Mechanically‑Driven Diaphragm Metering Pump

DJ‑Z Mechanical‑Driven Diaphragm Metering Pump

FPZ series corrosion-resistant self-priming centrifugal pump

FPZ series corrosion-resistant self-priming centrifugal pumpThe FPZ corrosion-resistant self-priming centrifugal pump is injection molded using reinforced polypropylene (CFR-PP). It boasts high mechanical strength and strong corrosion resistance. The self-priming pump structure is well-designed, with the pump chamber equipped with a suction chamber, a reservoir chamber, a return check valve, a gas-liquid separation chamber, and a return hole. Only priming is required before the first startup, and there is no need for repeated priming thereafter. When pumping the medium, the fluid can be intermittent. The mechanical seal does not require additional cooling water for cooling. It is easy to operate, safe, and less prone to leakage, making it a viable alternative to submerged pumps.CFR-PP material: non-toxic, resistant to general acids, alkalis, and salts, operating temperature -14℃～80℃. 

ZMD type fluoroplastic self-priming magnetic pump

ZMD type fluoroplastic self-priming magnetic pump1. Product Overview:The ZMD type fluoroplastic self-priming magnetic pump (also known as the ZCQ-F type fluoroplastic self-priming magnetic pump) is a product that applies the working principle of the permanent magnet coupling to the self-priming pump. It addresses the issues of shaft seals in general shaft-driven centrifugal pumps, such as easy leakage, spillage, dripping, and leakage, while also exhibiting excellent self-priming capabilities. The design is reasonable, the sealing performance is good, and it is resistant to leakage.II. Product Features:The ZMD fluoroplastic magnetic self-priming pump features flow passage components made of fluoroplastic, with a metal casing lined with polyperfluoroethylene propylene (F46). The pump cover and impeller are both made of metal inserts coated with fluoroplastic and sintered together, providing high mechanical strength and eliminating the magnetic eddy current phenomenon found in ordinary magnetic pumps. After priming the pump before its first use, there is no need to prime it again for subsequent uses. Simply turn it on and it can pump and transport liquids below the pump's installation position.The ZMD fluoroplastic magnetic self-priming pump adopts a rear-pull structure, allowing one person to easily carry out internal maintenance and part replacement without dismantling the pipeline, facilitating daily maintenance and repair work.III. Product Application:It is widely used in industries such as petrochemicals, non-ferrous metal smelting, pesticides, acid and alkali production, paper making, acid washing processes, rare earth separation, electroplating, electronics, and foil formation to extract and transport flammable, explosive, volatile, corrosive liquids, organic solvents, and precious liquids below the pump installation position.  IV. Conditions of use:1. Operating temperature: -20°C to 120°C

CQG High-Temperature Magnetic Drive Pump

MT-HTP High-Temperature Magnetic Drive Pump

CQB-L Vertical Magnetic Drive Pump

ZBF Self-Priming Engineering Plastic Magnetic Drive Pump

ZMD Self-Priming Fluoroplastic Magnetic Drive Pump

CQB-G High-Temperature Magnetic Drive Centrifugal Pump (Water-Cooled)