WhatsApp :+8615680632715

Home

8/6E-XXAH Slurry Pump

Date:

2024-11-15

8/6E-XXAH Slurry Pump

Introduction to Performance Parameters of 8/6E-XXAH Slurry Pump

Hebei Xingou Pump Industry / info@xo-pump.com / +8615364966178

8/6E-XXAH slurry pump model list

XXAH slurry pump model list: 8/6E-XXAH high chromium alloy material, and 8/6E-XXAHR natural rubber material

8/6E-XXAH slurry pump model meaning

XXAH slurry pump model meaning: 8/6E-XXAH, representing an inlet of 8 inches and an outlet of 6 inch, E-type bracket, XXAH series slurry pump.

8/6E-XXAH slurry pump transmission and sealing method

8/6E-XXAH slurry pump transmission mode: CRZ, CV, DCZ, ZVZ. The sealing methods include packing seal, pressure reducing cover impeller seal, and mechanical seal. slurry pump model list

8/6E XXAH slurry pump, also known as heavy-duty slurry pump. Due to its thick wear-resistant components and heavy-duty bracket, this type of pump is suitable for conveying strong abrasion, high concentration slurry or low concentration high head slurry. Within the maximum allowable working pressure range of the pump, it can be used in series in multiple stages. The XHH type pump is suitable for transporting low concentration high lift slurry or high concentration low abrasion high lift slurry. The above types of pumps can also be used for slurry with certain abrasiveness.

The horizontal slurry pump is a cantilever centrifugal slurry pump suitable for conveying abrasive or corrosive slurry. It is widely used in metallurgy, mining, petroleum, chemical, coal, power, transportation, river dredging, building materials, and municipal engineering departments.

The 8/6E XXAH slurry pump adopts a dual pump casing structure, which means that the pump body and pump cover are equipped with replaceable wear-resistant metal lining (including impeller, sheath, protective plate, etc.). The pump body and pump cover are made of gray cast iron or ductile iron according to the working pressure, vertically split and connected with bolts. The pump body has a stopper connected to the bracket with bolts. The discharge port of the pump can be rotated and installed at eight angles. The front and rear cover plates of the impeller are equipped with back blades to reduce leakage and improve the service life of the pump.

Keywords: